Welcome to Aerodrome Accessories, please create an account.

Sails of Glory

5 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Ratlines Wave 1 Set

    Ratlines Wave 1 Set

    $14

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  This set comes with a fret for each of the four ships in Wave 1.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  2. Ratlines 101

    Ratlines 101

    $4

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  3. Ratlines 102

    Ratlines 102

    $4

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  4. Ratlines 103

    Ratlines 103

    $4

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  5. Ratlines 104

    Ratlines 104

    $4

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More

5 Item(s)

per page

List  Grid 

Set Descending Direction