Welcome to Aerodrome Accessories, please create an account.

Hobby

24 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Lozenge, 4 Color Decals

    Lozenge, 4 Color Decals

    $11

    These decal sheets have a block of upper and a block of lower 4 Color Lozenge pattern.  Each block measures 3.5x2.3 inches (90x60mm), enough to do several wings or one or two complete scout minis.

    Learn More
  2. Fokker DR.I Decals, Part 2 by Aviation Wings

    Fokker DR.I Decals, Part 2 by Aviation Wings

    $15

    The Fokker DR.I - Part 2 decal sheet contains enough decals to model the following 8 pilots:

    • Ltn. Werner Voss, Jasta 10, Sept. 1917
    • Ltn. von Ruben, Jasta 7 (Blue) / Jasta 18 (Red)
    • Ltn. Hans Karl von Linsingen, Jasta 11, Jan 1918
    • Oblt. Blumenbach, Jasta 12, Apr 1918
    • Unknown Pilot, Jasta 14, May 1918
    • Ltn Hans Besser, Jasta 12, Summer 1918
    • Ltn. Hans Muller, Jasta 15
    • Unknown Pilot, Jasta 11, April 1918
    Learn More
  3. Albatros D.V Decals, Part 1 by Aviation Wings

    Albatros D.V Decals, Part 1 by Aviation Wings

    Regular Price: $15

    Special Price $10

    The Albatros D.V - Part 1 decal sheet contains enough decals to model the following 8 pilots:

    • Ltn. d RJ. Janzen, Jasta 23, Summer 1917
    • Ltn. H. Auer, Jasta 32
    • Ltn. Lehmann, Jasta 59
    • Ltdn. O. Fuchs, Jasta 77b, Mar 1918
    • Unknown Pilot, Jasta 18
    • Ltn. H. Kroll, Jasta 23, Summer 1917
    • Vfw J. Mai, Jasta 5, Late 1917
    • Ltn. F. ritter von Röth, Jasta 23b, early 1918
    Learn More
  4. Albatros D.V Decals, Part 2 by Aviation Wings

    Albatros D.V Decals, Part 2 by Aviation Wings

    Regular Price: $15

    Special Price $10

    The Albatros D.V - Part 2 decal sheet contains enough decals to model the following 8 pilots:

    • Ltn. K. Monnington, Jasta 15, 1917
    • Offz Stv M. Müller, Jasta 28, Aug 1917
    • Ltn. C. Meierdirks, Jasta 12
    • Ltn. F. Hochstetter, Jasta 12, Aug 1917
    • Ltn. L. Webber, Jasta 3, 1917
    • Ltn. H. Waldhausen, Jasta 37, Sumer 1917
    • Uknown Pilot and Jasta
    • Ltn. U. Neckel, Jasta 12, 1917
    Learn More
  5. Albatros D.III Decals, Part 1 by Aviation Wings

    Albatros D.III Decals, Part 1 by Aviation Wings

    $15

    The Albatros D.III - Part 1 decal sheet contains enough decals to model the following 8 pilots:

    • Offz Stv F. Altemeier, Jasta 24, Summer 1917
    • G. Bassenge, Jasta 2, Summer 1917
    • Vfw F. Jacobson, Jasta 31, April 1917
    • Ltn. H. Frommherz, Jasta 2, 1917
    • Ltn d R H. Habich, Jasta 49, Mar 1918
    • Ltn. F.W. Wichard, Jasta 24
    • Unknown Pilot and Jasta
    • Ltn. O. Muller, Jasta 12, Fall 1917
    Learn More
  6. Albatros D.III Decals, Part 2 by Aviation Wings

    Albatros D.III Decals, Part 2 by Aviation Wings

    $15

    The Albatros D.III - Part 2 decal sheet contains enough decals to model the following 8 pilots:

    • Ltn. J. Buckler, Jasta 17
    • Ltn. d R R. Wenzl, Jasta 31, June 1917
    • Obit. R. Berthold, Jasta 14, Apl 1917
    • Unknown Pilot, Jasta 12, Summer 1917
    • Ltn. R W. Prien, Jasta Boelcke, July 1917
    • Ltn. E. Bohme, JAsta Schule
    • Ltn. H. Bussing, Jasta 48
    • H. Berr, Jasta 5, Apr 1917
    Learn More
  7. Albatros D.I Decals, Part 1 by Aviation Wings

    Albatros D.I Decals, Part 1 by Aviation Wings

    Regular Price: $15

    Special Price $10

    The Albatros D.I - Part 1 decal sheet contains enough decals to model the following 8 pilots:

    • Ltn. J. Buckler, Jasta 17
    • Ltn. d R R. Wenzl, Jasta 31, June 1917
    • Obit. R. Berthold, Jasta 14, Apl 1917
    • Unknown Pilot, Jasta 12, Summer 1917
    • Ltn. R W. Prien, Jasta Boelcke, July 1917
    • Ltn. E. Bohme, JAsta Schule
    • Ltn. H. Bussing, Jasta 48
    • H. Berr, Jasta 5, Apr 1917
    Learn More
  8. Iron Cross Decals

    Iron Cross Decals

    $11

    This is a sheet of Iron Cross (29 Oct 1916 - 17 Mar 1918) decals for use on 1/144 scale aircraft miniatures.  Each sheet has a total of 120 cross, broken down as follows...

    3.5mm: 8

    4mm: 14

    5mm: 12

    6mm: 10

    7mm: 28

    8mm: 8

    9mm: 8

    10mm: 22

    11.5mm: 6

    13.5mm: 4

    Learn More
  9. Iron Cross with white outline Decals

    Iron Cross with white outline Decals

    $11

    This is a sheet of Iron Cross (29 Oct 1916 - 17 Mar 1918) decals for use on 1/144 scale aircraft miniatures.  Each sheet has a total of 120 cross, broken down as follows...

    3.5mm: 8

    4mm: 14

    5mm: 12

    6mm: 10

    7mm: 28

    8mm: 8

    9mm: 8

    10mm: 22

    11.5mm: 6

    13.5mm: 4

    Learn More
  10. Iron Crosson White Fields Decals

    Iron Crosson White Fields Decals

    $11

    This is a sheet of Iron Cross (25 Jun 1916 - 29 Oct 1918) decals for use on 1/144 scale aircraft miniatures.  Each sheet has a total of 120 cross, broken down as follows...

    3.5mm: 8

    4mm: 14

    5mm: 12

    6mm: 10

    7mm: 28

    8mm: 8

    9mm: 8

    10mm: 22

    11.5mm: 6

    13.5mm: 4

    Learn More
  11. Lozenge, 5 Color Decals

    Lozenge, 5 Color Decals

    $11

    These decal sheets have a block of upper and a block of lower 5 Color Lozenge pattern.  Each block measures 4x2.4 inches (101x62 mm), enough to do several wings or one or two complete scout minis.

    Learn More
  12. Fokker DR.I Decals, Part 1 by Aviation Wings

    Fokker DR.I Decals, Part 1 by Aviation Wings

    $15

    The Fokker DR.I - Part 1 decal sheet contains enough decals to model the following 8 aces:

    • Ltn. Johann Janzen, Jasta 6, March 1918
    • Vzfw Ulrich Neckel, Jasta 12, April 1918
    • Vzfw Otto Esswein, Jasta 26, May 1918
    • Ltn. Hermmann Frommherz, Jasta Boelcke, May 1918
    • Ltn. Hans Werner, Jasta 17, 1918
    • Ltn. Hermann Becker, Jasta 12, March 1918
    • Ltn. Hermann Vallendor, Jasta Boelcke, May 1918
    • Ltn. Eberhardt Mohnicke, Jasta 11, March 1918
    Learn More
  13. Two Blade Spinning Propellers - 10mm

    Two Blade Spinning Propellers - 10mm

    $3

    Out of stock

    These 2 Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 10mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  14. Two Blade Spinning Propellers - 19mm

    Two Blade Spinning Propellers - 19mm

    $3

    Out of stock

    These 2 Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 19mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  15. Three Blade Spinning Propellers - 10mm

    Three Blade Spinning Propellers - 10mm

    $3

    These 10mm Three Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those snaller kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 10mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  16. Three Blade Spinning Propellers - 14mm

    Three Blade Spinning Propellers - 14mm

    $3

    These 14mm Three Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those snaller kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 14mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  17. Three Blade Spinning Propellers - 19mm

    Three Blade Spinning Propellers - 19mm

    $3

    These 3 Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 19mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  18. Four Blade Spinning Propellers - 14mm

    Four Blade Spinning Propellers - 14mm

    $3

    Out of stock

    These 14mm Four Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those snaller kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 14mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  19. Four Blade Spinning Propellers - 19mm

    Four Blade Spinning Propellers - 19mm

    $3

    These 4 Blade Spinning Propellers (10 to a bag) are great to replace broken propellers or for those kits and Shapeways models that need a propeller.  They also add more visual appeal to your games since your miniatures now look like they are flying through the air instead of gliding with a frozen prop!

    Laser cut and etched out of .76mm frosted clear acrylic, they measure 19mm in diameter.  There is a center hole cut as well, so all you have to do is remove the protective mask and slide a need through them to act as the propeller hub and secure it to your mini.

    Learn More
  20. Ratlines Wave 1 Set

    Ratlines Wave 1 Set

    $14

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  This set comes with a fret for each of the four ships in Wave 1.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  21. Ratlines 101

    Ratlines 101

    $4

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  22. Ratlines 102

    Ratlines 102

    $4

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  23. Ratlines 103

    Ratlines 103

    $4

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More
  24. Ratlines 104

    Ratlines 104

    $4

    Out of stock

    Anchorage Accessories is proud to offer a set of custom designed ratlines for the Sails of Glory Series 1 ships.  These ratlines are photo etched out of .01mm brass.  Each set gives you a total of 12 shrouds, enough to rig a single ship.  They come with a vacuumed sealed film on both side to protect the delicate details.  You will have to remove the film before using.  It is highly recommended that you paint these while they are still attached to the fret (the surrounding metal frame).  The best way to remove them is with a sharp hobby knife.  They can be attached to the ships with your choice of glue types.

    Each set is labeled for the Sails of Glory ship it was designed for.  So, set number 101 will fit all four of the ships with the Ares product code SGN101.  Each ratline is also numbered.  Number 1 goes to the lower fore mast, Number 2 to the upper fore mast.  Number 3 to the lower main mast, Number 4 to the upper main mast.  Finally, Number 5 to the lower aft mast, and Number 6 to the upper aft mast.  This is repeated on the other side (just flip the ratlines over to get the correct angle).  On most of the ships, the flag and pole will have to be removed in order to fit these ratlines.

    Learn More

24 Item(s)

per page

List  Grid 

Set Descending Direction